In the new cottage we have several areas that could benefit from some dramatic lighting. Unfortunately we didn’t want to spend a ton of money to make a big impact. So while on a shopping trip to Ikea I saw some large white drum lamp shades and had the idea to cover them in some of our fabric. Being able to customize your own fabric lamp shades and add trim and save some money sounded like a win win for everyone.
[title maintitle=”Fabric Lamp Shade DIY” subtitle=”The Supplies”]
Lamp shades: NYMO – $34.99 lampshade 28”
Fabric: 1-3 yards of Katie Kime fabric (3 yards covers 3 lamp shades with only one seam. If you only want to cover one lamp, one yard will do but you will have 2 seams)
Bias Tape for trim.
[title maintitle=”How To” subtitle=”The DIY part”]
Unroll lamp shade and place on top of the fabric
If you are using 3 yards cut 1 piece, if you are using 1 yard cut 2 pieces.
Each lamp is 87 3/8” x 15 3/4”
Super hint here, take your lamp shade outside to spray with the adhesive. The spray will mist everywhere and leave your house sticky. It needs a few minutes to get tacky anyhow so you have time. Make sure you spray the fabric side of the lamp shade.
Attach the fabric to the lamp shade.
Cut the bias tape to the length of the lamp shade and place it over the edge. This will help when gluing with the glue gun.
Glue the top side first.
After you flip it over and start to glue the backside, cut notches around the little white clips. Continue on both sides till all of the trim is glued on.
Attach the shade to the frame. Then cut a piece of bias tape and hot glue to cover the seam.
[title maintitle=”Fabric Lamp Shade” subtitle=”The reveal”]
Hang your lamp shade from a can if you have one. You can buy a pendant light conversion kit to screw right into the socket as we did here. Don’t you just love this look. And now to cover more in different fabrics for the other rooms in the cottage.